The BUSTR Permit Process (2024)

Activities That Require a BUSTR Permit

Rule 1301:7-9-10 of the administrative Code, often referred to as the ‘permit rule’, addresses the process for obtaining a permit to perform work on underground storage tank (UST) systems regulated by the Bureau of Underground Storage Tank Regulations (BUSTR). A permit is required to perform the following types of work:

  • Install;
  • Remove;
  • Close-in-place;
  • Take out of service more than 90 days;
  • Perform a change in service;
  • Perform a major repair of an UST system that has caused a release; or
  • Perform a modification of an UST system or component.

It is important to note that not all tanks are regulated by BUSTR, and you should review paragraph (C) of rule 1301:7-9-01 and paragraph (B)(64) of 1301:7-9-02 of the Administrative Code for lists of tanks that are exempt or excluded from BUSTR regulation. Often, a permit is still required to perform work on flammable and combustible tanks that are not regulated by BUSTR, the permit shall be obtained in accordance Ohio Fire Code through the local fire authority or State Fire Marshal’s Code Enforcement Bureau.

Where to Obtain a BUSTR Permit

Regardless of ownership, any person performing work on a BUSTR regulated UST system must obtain a permit before the permit related work takes place. During emergency situations, BUSTR may grant verbal approval to perform work prior to the issuance of a written permit.

BUSTR permits can be obtained from the BUSTR central office in Reynoldsburg, Ohio, or in some cases, from local fire departments that have be delegated by BUSTR to issue permits on our behalf. A list delegated fire departments is posted on the BUSTR web site at http://www.com.ohio.gov/fire/bustMain.aspx.

To obtain a permit, an ‘Application for BUSTR Underground Storage Tank Permit—Part A’ must be filled out and submitted to BUSTR or to the delegated fire department (a copy of the permit application is available on the BUSTR web site at http://www.com.ohio.gov/fire/bustMain.aspx). BUSTR charges a fee of $35 to obtain a permit. Delegated fire department charge their own fees and these fees may be different from what BUSTR charges. If the work being performed involves the installation of a new UST, then an ‘Application for BUSTR Underground Storage Tank Permit—Part B’ must be completed and submitted along with additional plans and written descriptions.

Permit Review and Approval

After a complete permit application is submitted, BUSTR or the delegated fire department will review the application and confirm that the proposed work is in compliance with all applicable BUSTR and Ohio Fire Code (OFC) rules and regulations. If the permit application meets BUSTR and OFC requirements, the work is approved and a permit to conduct work is issued.

Performance of Work Under a BUSTR Permit

Once a permit application is approved and a permit is issued, work may commence. The permit will remain open for six months; after which, a new permit must be obtained or an extension must be obtained under the original permit.

Important: Most work performed under a permit must be supervised by an Installer certified pursuant to rule 1301:7-9-11 of the Administrative Code and inspected by an UST Inspector certified pursuant to rule 1301:7-9-15 of the Administrative Code. It is the obligation of the permit holder to make all appropriate arrangements to ensure that work is properly supervised and inspected. Lists of all Certified UST Installers and Inspectors are posted on the BUSTR web site at http://www.com.ohio.gov/fire/bustMain.aspx.

BUSTR Inspection Procedures

For every activity that requires a permit, there are times during the work when inspections must be performed. In areas under the authority of a delegated fire department, the designated local inspector is required to perform all inspections. In other parts of the State, BUSTR Inspectors or state certified private inspectors may be used. It is the responsibility of the permit holder to contact the inspector at the times when an inspection is required. Citations will be issued if a permit holder fails to have work properly inspected, and any work that is not properly inspected must be performed over. Rule 1301:7-9-15 of the Administrative code provides a complete description of when inspections are required. A copy of this rule is posted on the BUSTR web page at http://www.com.ohio.gov/fire/bustMain.aspx.

Following each inspection, the inspector will complete an ‘Inspection Field Report’ and leave a copy of the report at the site or with the permit holder.

Inspections are often billed separately from the initial permit application fee. The fee for a state inspector (BUSTR inspector) is $60 per hour or fraction thereof. The inspection fee charged by delegated fire department inspectors or by state certified private inspectors is not controlled by BUSTR and can be set at the discretion of the inspector.

Post Inspection Requirements

After the final inspection is performed, an invoice will be sent to the permit holder (or UST owner) for any fees owed to the fire marshal for inspections performed by a state inspector (BUSTR Inspectors). No person shall operate any UST system or portion thereof upon which there are past due permit fees or inspection fees owed to the fire marshal.

Please note: A closure assessment is required following most types of permit related work. Please contact BUSTR’s Release Prevention Section to discuss which activities trigger a closure assessment at 614-752-7938.

Bureau of Underground Storage Tank Regulations
8895 East Main Street
Reynoldsburg, Ohio 43068
614-752-7938

The BUSTR Permit Process (2024)

FAQs

What is required to be checked during a monthly walkthrough? ›

The monthly walkthrough inspections need to include the following: Single wall spill buckets-checking for visual damage; removing liquid and debris; checking and removing obstructions in the fill pipe.

Who is primarily in charge of regulating the underground storage tank program in Ohio? ›

The Bureau of Underground Storage Tank Regulations (BUSTR) regulates the safe operation of underground storage tanks (USTs) containing petroleum (and hazardous substances) and supervises the appropriate investigation and cleanup of suspected and confirmed releases from such tanks to protect human health and preserve ...

What will you check in walkthrough? ›

Here's a checklist of important things to be on the lookout for during the final walk-through.
  1. Inspection Repairs. ...
  2. Belongings Moved In Or Out. ...
  3. Locks And Windows. ...
  4. Appliances. ...
  5. Mold. ...
  6. Electricity And Outlets. ...
  7. Backyard And Outdoors. ...
  8. Pests.

What is a typical inspection test plan? ›

An ITP (Inspection test plan) is an inspection checklist of required inspections. It lists your task inspections and provides and easy to follow plan to improve quality assurance. It's a plan that lists what tests and inspections should be performed throughout each phase of a project.

What does bustr mean? ›

BUSTR regulates Ohio's underground storage tank program. BUSTR works to prevent and detect releases of petroleum from regulated USTs and to review and evaluate corrective actions when a petroleum release occurs.

Do all tanks have to meet federal EPA regulations? ›

Only those tanks that meet the definition of an underground storage tank (UST) system are covered by the UST regulations. Aboveground storage tanks (ASTs) are subject to other federal, state, or local regulations.

What is a line tightness test? ›

Line tightness testing

The line is taken out of service and pressurized, usually above the normal operating pressure. A drop in pressure over time, usually an hour or more, suggests a possible leak. Suction lines are not pressurized very much during a tightness test (about 7 to 15 pounds per square inch).

What is a walkthrough inspection? ›

A Walk-Through Inspection is the inspection of the property just before closing to ensure it is still in the same condition, no new damage has been done, and all fixtures included in the sale are still present.

What to check during Blue Tape walkthrough? ›

Gutters and Downspouts: Check for proper installation and functionality. Siding or Exterior Walls: Look for any cracks, gaps, or damage. Windows and Doors: Check for proper installation, sealing, and operation. Deck or Patio: Inspect for stability, loose boards, or any safety concerns.

What should I look for in a routine visual inspection? ›

The primary things to look for during a visual inspection are defects, asset conditions that give the impression that maintenance is needed, and any potential issues that question the integrity of the product, equipment, or structure.

What is walkthrough inspection and review? ›

Walkthrough is a static method of quality assurance. Walkthrough are informal meetings but with purpose. 2. Inspection : An inspection is defined as formal, rigorous, in depth group review designed to identify problems as close to their point of origin as possible.

References

Top Articles
Latest Posts
Article information

Author: Manual Maggio

Last Updated:

Views: 5810

Rating: 4.9 / 5 (69 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Manual Maggio

Birthday: 1998-01-20

Address: 359 Kelvin Stream, Lake Eldonview, MT 33517-1242

Phone: +577037762465

Job: Product Hospitality Supervisor

Hobby: Gardening, Web surfing, Video gaming, Amateur radio, Flag Football, Reading, Table tennis

Introduction: My name is Manual Maggio, I am a thankful, tender, adventurous, delightful, fantastic, proud, graceful person who loves writing and wants to share my knowledge and understanding with you.